| LogiCORE™ | 版本 | 支持 AXI4 | 軟件支持 | 支持的器件係列 |
| 測試模式生成器 | v8.1 | AXI4-Stream AXI4-Lite |
Vivado® 2021.1 | Versal™ Kintex® UltraScale+™ Virtex® UltraScale+ Zynq® UltraScale+ Kintex UltraScale™ Virtex UltraScale Zynq-7000 Artix®-7 Kintex-7 Virtex-7 / HT / XT |
| 測試模式生成器 | v4.00a | AXI4-Stream AXI4-Lite |
ISE® 14.4 | Zynq-7000 Artix-7 Kintex-7 Virtex-7 / HT / XT |
Download the required software from the Xilinx.comDownloadspage. For information onNew Features, Known Issues, and Patchesplease refer to theLicensing Solution Center.
* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.
The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.