| LogiCORE™ | Version | Software Support | Supported Device Families |
| 64-bit Initiator/Target 133 MHz for PCI-X EF-DI-PCIX-V5-SITE |
v6/v5 | ISE® 12.1 | Virtex®-5 Virtex-4 |
| 64-bit Initiator/Target 133 MHz for PCI-X EF-DI-PCIX-V5-SITE |
v6/v5 | ISE 10.1 SP3 | Virtex-II Pro Virtex-II Virtex-E |
| 64-bit Initiator/Target for PCI EF-DI-PCI64-IP-SITE |
v4/v3 | Vivado® 2012.3 | Artix®-7 Kintex®-7 |
| 64-bit Initiator/Target for PCI EF-DI-PCI64-IP-SITE |
v4/v3 | ISE 14.3 | Zynq®-7000 Artix-7 Kintex-7 Virtex-5 LXT / SXT / FXT / TXT / LX Virtex-4 Spartan®-6 LX / LXT Spartan-3A DSP Spartan-3A Spartan-3 / 3E |
| 64-bit Initiator/Target for PCI EF-DI-PCI64-IP-SITE |
v4/v3 | ISE 10.1 SP3 | Virtex-II / II Pro Virtex-E / Virtex Spartan-IIE / Spartan-II |
| 32-bit Initiator/Target for PCI EF-DI-PCI32-IP-SITE |
v4/v3 | Vivado 2012.3 | Artix-7 Kintex-7 |
| 32-bit Initiator/Target for PCI EF-DI-PCI32-IP-SITE |
v4/v3 | ISE 14.3 |
Zynq-7000 Artix-7 Kintex-7 Virtex-5 LXT / SXT / FXT / TXT / LX Virtex-4 Spartan-6 LX / LXT Spartan-3A DSP Spartan-3A Spartan-3 / 3E |
| 32-bit Initiator/Target for PCI EF-DI-PCI32-IP-SITE |
v4/v3 | ISE 10.1 SP3 | Virtex-II / II Pro Spartan-IIE / Spartan-II |
| 32-bit Initiator/Target for PCI Single Project Spartan Series EF-DI-PCI32-SP-PROJ |
v4/v3 | ISE 14.3 | Spartan-6 LX / LXT Spartan-3A DSP Spartan-3A Spartan-3 / 3E |
| 32-bit Initiator/Target for PCI Single Project Spartan Series EF-DI-PCI32-SP-PROJ |
v4/v3 | ISE 10.1 SP3 | Spartan-IIE / Spartan-II |
| PLBv46 to PCI Full Bridge EF-DI-PCI32-SP-PROJ EF-DI-PCI32-IP-SITE EF-DI-PCI-AL-SITE EF-DI-PCIX64-VE-SITE |
v1.04a | ISE 13.2 | Virtex-5 SXT / LXT Virtex-5 LX Virtex-4 FX / SX / LX Spartan-3 |
* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.
The IP cores will be fully functional for approximately 9 hours at 66 MHz and 4 hours at 33 MHz . After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again