Resource Utilization for Block Memory Generator v8.4

Vivado Design Suite Release 2024.1

Interpreting the results

This page contains resource utilization data for several configurations of this IP core. The data is separated into a table per device family. In each table, each row describes a test case. The columns are divided into test parameters and results. The test parameters include the part information and the core-specific configuration parameters. Any configuration parameters that are not listed have their default values; any parameters with a blank value are disabled or set automatically by the IP core. Consult the product guide for this IP core for a list of GUI parameter and user parameter mappings.

Resource figures are taken from the utilization report issued at the end of implementation using the Out-of-Context flow in Vivado Design Suite.
The Out-of-Context IP constraints include HD.CLK_SRC properties as required to ensure correct hold timing closure: these properties are enabled using the Tcl command: set_param ips.includeClockLocationConstraints true
The frequencies used for clock inputs are stated for each test case.
LUT figures do not include LUTs used as pack-thrus, but do include LUTs used as memory.
Default Vivado Design Suite 2024.1 settings were used. You may be able to improve on these figures using different settings. Because surrounding circuitry will affect placement and timing, no guarantee can be given that these figures will be repeatable in a larger design.

Virtex-7

Part Information			Configuration Parameters																																Resource Utilization
Device	Package	Speed Grade	Configuration Name	Interface_Type	AXI_Type	AXI_Slave_Type	Memory_Type	Use_Byte_Write_Enable	Byte_Size	Algorithm	Primitive	Assume_Synchronous_Clk	Write_Width_A	Write_Depth_A	Read_Width_A	Operating_Mode_A	Enable_A	Write_Width_B	Read_Width_B	Operating_Mode_B	Enable_B	Register_PortA_Output_of_Memory_Primitives	Register_PortA_Output_of_Memory_Core	Register_PortB_Output_of_Memory_Primitives	Register_PortB_Output_of_Memory_Core	Fill_Remaining_Memory_Locations	Remaining_Memory_Locations	Use_RSTA_Pin	Output_Reset_Value_A	Use_RSTB_Pin	Output_Reset_Value_B	Collision_Warnings	use_bram_block	Fixed clocks (MHz)	LUTs	FFs	DSPs	36k BRAMs	18k BRAMs	Speedfile Status
xc7vx1140t	flg1928	2	bmg_conf_1	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	36	512	36	WRITE_FIRST	Use_ENA_Pin	36	36	WRITE_FIRST	Use_ENB_Pin	false	false	false	false	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	10	12	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_10	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	34	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	false	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	40	8	0	3	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_11	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Fixed_Primitives	1kx18	false	17	5120	34	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	false	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	41	8	0	3	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_12	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Low_Power	8kx2	false	17	5120	34	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	false	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	41	8	0	3	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_13	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Minimum_Area	8kx2	false	36	4096	36	WRITE_FIRST	Use_ENA_Pin	36	36	WRITE_FIRST	Always_Enabled	false	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	5	6	0	4	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_14	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Fixed_Primitives	512x36	false	36	4096	36	WRITE_FIRST	Use_ENA_Pin	36	36	WRITE_FIRST	Always_Enabled	false	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	43	8	0	4	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_16	AXI4	AXI4_Full	Memory_Slave	Simple_Dual_Port_RAM	true	8	Minimum_Area	8kx2	true	32	1024	32	READ_FIRST	Use_ENA_Pin	32	32	READ_FIRST	Use_ENB_Pin	false	false	false	false	false	0		0		0	ALL	Stand_Alone	s_aclk=50	168	103	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_17	AXI4	AXI4_Full	Memory_Slave	Simple_Dual_Port_RAM	true	8	Minimum_Area	8kx2	true	64	512	64	READ_FIRST	Use_ENA_Pin	64	64	READ_FIRST	Use_ENB_Pin	false	false	false	false	false	0		0		0	ALL	Stand_Alone	s_aclk=50	185	106	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_18	AXI4	AXI4_Full	Peripheral_Slave	Simple_Dual_Port_RAM	true	8	Minimum_Area	8kx2	true	32	1024	32	READ_FIRST	Use_ENA_Pin	32	32	READ_FIRST	Use_ENB_Pin	false	false	false	false	false	0		0		0	ALL	Stand_Alone	s_aclk=50	103	59	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_19	AXI4	AXI4_Full	Peripheral_Slave	Simple_Dual_Port_RAM	true	8	Minimum_Area	8kx2	true	64	512	64	READ_FIRST	Use_ENA_Pin	64	64	READ_FIRST	Use_ENB_Pin	false	false	false	false	false	0		0		0	ALL	Stand_Alone	s_aclk=50	104	57	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_2	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	36	512	36	WRITE_FIRST	Use_ENA_Pin	36	36	WRITE_FIRST	Use_ENB_Pin	true	false	true	false	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	10	12	0	1	0	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_3	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Use_ENB_Pin	false	false	false	false	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	48	18	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_4	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Use_ENB_Pin	true	false	true	false	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	50	24	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_5	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Use_ENB_Pin	false	true	false	true	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	40	40	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_6	Native	AXI4_Full	Memory_Slave	True_Dual_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Use_ENB_Pin	true	true	true	true	false	0	true	0	true	0	ALL	Stand_Alone	clka=50 clkb=50	36	46	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_7	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	true	false	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	25	12	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_8	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	false	true	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	20	20	0	2	1	PRODUCTION 1.11 2014-09-11
xc7vx1140t	flg1928	2	bmg_conf_9	Native	AXI4_Full	Memory_Slave	Single_Port_RAM	false	9	Minimum_Area	8kx2	false	17	5120	17	WRITE_FIRST	Use_ENA_Pin	17	17	WRITE_FIRST	Always_Enabled	true	true	false	false	false	0	true	0	false	0	ALL	Stand_Alone	clka=50	18	23	0	2	1	PRODUCTION 1.11 2014-09-11

COPYRIGHT

Copyright 2024 Xilinx, Inc. Xilinx, the Xilinx logo, Alveo, Artix, ISE, Kintex, Spartan, Versal, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx in the United States and other countries. Arm is a registered trademark of Arm Limited in the EU and other countries. All other trademarks are the property of their respective owners.

LEGAL INFORMATION: PLEASE READ

The information disclosed to you hereunder (the "Materials") is provided solely for the selection and use of Xilinx products. To the maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are subject to the terms and conditions of Xilinx's limited warranty, please refer to Xilinx's Terms of Sale which can be viewed at https://www.xilinx.com/legal.htm#tos; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx. Xilinx products are not designed or intended to be fail-safe or for use in any application requiring fail-safe performance; you assume sole risk and liability for use of Xilinx products in such critical applications, please refer to Xilinx's Terms of Sale which can be viewed at https://www.xilinx.com/legal.htm#tos.